PLANET FGSD-1008HPS - Manual (Page 86)

User’s Manual of FGSD / FGSW Web Smart PoE Switch
86
4.10 PoE Setting
The 8/16/24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Web Smart Ethernet Switch can easily build a power
central-controlled IP phone system, IP camera system and AP group for the enterprise. For instance, cameras / APs can be
easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office.
Without the power-socket limitation, the 8/16/24-Port 10/100TX 802.3at PoE + 2-Port Gigabit TP/SFP Combo Web Smart
Ethernet Switch makes the installation of cameras or WLAN APs easier and more efficient.
PoE Power Budget list for PoE Web Smart Switch
Model Name PoE Budget @ 25 degrees C PoE Budget @ 50 degrees C
FGSD-1008HPS 125 watts 125 watts
FGSW-1816HPS 220 watts 220 watts
FGSW-2624HPS 220 watts 190 watts
FGSW-2624HPS4 420 watts 420 watts
PD Classifications
A PD may be classified by the PSE based on the classification information provided by the PD. The intent of PD classification is
to provide information about the maximum power required by the PD during operation. However, to improve power management
at the PSE, the PD provides a signature about Class level.
The PD is classified based on power. The classification of the PD is the maximum power that the PD will draw across all input
voltages and operational modes.
A PD will return Class 0 to 4 in accordance with the maximum power draw as specified by Table 4-10-1.
Class Usage Range of maximum power used by the PD Class Description
0 Default
12.95 watts (or to 15.4 watts for AF mode)
25.5 watts (or to 30.8 watts for AT mode)
Mid power or High power
1 Optional 0.44 to 3.84 watts Very low power
2 Optional 3.84 to 6.49 watts Low power
3 Optional 6.49 to 12.95 watts (or to 15.4 watts) Mid power
4 Optional 12.95 to 25.50 watts (or to 30.8 watts) High power
Table 4-10-1 Device Class