PLANET FGSW-2402PVS - Manual (Page 13)

9
Figure 3-2 Power-up System Self-diagnostic screen
" '
After the self-test completes successfully, the screen in figure 3-3 appears. Login is required to access the
console interface. The factory default username is " admin " without password. You may change it in the Misc
Configuration . To access to the Main Menu, please always enter the correct username and password.
Figure 3-3 Switch Console Login screen
) #
) )
Switch allows users to configure the device via menu screens.
To work within the menu, please follow the guidelines shown in Table 3-1.
Item Description
Value 0-9 Choose one item from the console screen.
TAB KEY Choose next item from the console screen.
Arrows KEY


means up, down, left, right .
BACKSPACE Back to previous item from the console screen.
ENTER KEY
Access the highlighted item from the console screen.
SPACE KEY When a List item is performed, the Space key starts
the selection and scrolls through the available choices.
ESC Return to the actions menu.
Table 3-1 General Guideline within the Menu
#
The main menu enables you to view and manage the Switch settings. Use the "Tab" keys to move the highlight over a
selection. Press “ Enter” key for chooses Smart function of Switch. After entering into any smart function
screen, choose <Edit> for configuring. Then Press the "Space Bar ” to toggle back and forth between the
options. After setup completed, press "ESC" key to return to Actions menu and use the "TAB" key to choose
the <Save> for save the current configuration. You can also choose each function through press the value 0-9
on your keyboard. Please refer to figure 3-4 for available options on main menu.