PLANET FGSW-2402PVS User Manual
Page 42
38
The screen in figure 4-29 appears.
Figure 4-29
Password Setting Screen
If disable the password protection. Then the following screen appears.
Figure 4-30
Password Setting Screen
Press,
“OK”
for logout the Switch. Then can enter into the web interface of the Switch without any username
and password request.
If enable the password protection. Then the following screen appears.
Figure 4-31
Password Setting Screen
Press,
“OK”
for re-login the Switch. Then enter into the web interface of the Switch with username and
password request. And also can modify the username and password.
After setup is completed. Press
"Apply"
button for save the current configuration. The screen in figure 4-32
appears with message
“Operation completed successfully!”