PLANET FGSW-2402PVS User Manual
Page 17
13
Object
Description
VLAN Configuration
Allow user to disable/enable the Port-based VLAN function.
The available options are shown as below:
Disabled:
disable VLAN function of the Switch.
PortBased:
enable port-based VLAN function of the Switch.
The available group ID from 1 to 255.
Return to Main Menu
Back to Main Menu screen.
Table 3-6
Descriptions of the VLAN Configuration screen Objects
3.2.6.1 Create a Port-Based VLAN Group
Choose
“PortBased”
from the VLAN mode of
VLAN Configure
. The screen in figure 3-9 appears with
message
“Press SPACE to select and ENTER to set mode”.
Please press
“Enter”
to continue.
The
following screen in figure 3-10 appears with message
“Change mode will clear original VLAN setting!
Continue? [Y/N].
Please press
“Y”
then the following screens in figure 3-11 & 3-12 appears.
Figure 3-9
Create a port-based VLAN Group screen
Figure 3-10
Create a port-based VLAN Group screen
Figure 3-11
Create a port-based VLAN Group screen