PLANET FGSW-2402PVS - Manual (Page 38)

34
Figure 4-17 QoS Configuration Screen
After setup is completed. Press "Apply" button for save the current configuration. The screen in figure 4-18
appears with message “Operation completed successfully!”
Figure 4-18 QoS Configuration save successfully Screen
Press “Back” for back to previous web screen.
" 7 8
This function allow to set bandwidth on each port. Table 4-3 shows the descriptions of the Bandwidth Control
screen Objects.
O Object Description
InRate Allow user to input the value of packet rate sent from the connected port to this
port. You must enable the flow control feature of this port for the function to work
normally. The available value ranges from 1 to 99.
OutRate Allow user to input the value of packet rate sent from this port to the connected
port. The available value ranges from 1 to 99.
Table 4-3 Descriptions of the Bandwidth Control screen Objects.
The screen in figure 4-19 appears.
Figure 4-19 Bandwidth Control setting Screen
After setup is completed. Press "Apply" button for save the current configuration. The screen in figure 4-20
appears with message “Operation completed successfully!”