PLANET FGSW-2402PVS User Manual
Page 44
40
Figure 4-35
System Information Screen
"
,/
%
This function allows modifying the IP address, subnet mask and default gateway. The screen in figure 4-36
appears.
Note:
The default IP address is 192.168.0.100
Figure 4-36
IP Configuration Screen
After setup is completed. Press
"Apply"
button for save the current configuration. The screen in figure 4-37
appears with message
“Operation completed successfully!”
Figure 4-37
IP Configuration save successfully Screen
Press
“Back”
for back to previous web screen.
"
0
%
This function provides the Power over Ethernet configuration of the Switch. The available options are shown as
below:
POE Ports
Allow user to Enable/Disable POE function and set port power feeding priority. Please refer to
section 4.11.1.