PLANET FNSW-1602S - Manual (Page 12)

10 11
3.1.3 Power-up Self-test Status
As the switch powers on, it goes through a self-test process to ensure proper operations
of the FNSW-1602S hardware. The messages will be displayed to show the test progress.
When the test completes successfully, the system will display a login screen. If any of the
components fails during the test, you may need to contact your local dealer and have the
switch replaced. Figure 3-2 shows a successful Self-test menu of the Power-up System
Self-diagnostic Process.
Figure 3-2 Power-up System Self-diagnostic screen
3.1.4 Login
Login is required to access the command console after the self-test completes
successfully. The factory default Username is “admin” without password. You may change
it in the Account Configuration.
To access to the Main Menu, please always enter the correct user-name and password.
The screen in figure 3-3 appears.
Figure 3-3 FNSW-1602S Login screen