PLANET FNSW-1602S - Manual (Page 27)

24 25
3.2.3.5.2 Change Password
Use the “TAB” key to move the highlight to the Change Password and press “Enter” to
access the screen of Change Password. The screen in figure 3-23 appears. Up to 10
characters is allowed for the password.
Figure 3-23 Password Configuration Screen
Please enter the current old password, and then enter the new password twice. After
setup completed, press “Enter” to save the new password. Then Press any key return to
the previous menu. The screen in figure 3-24 appears.
Figure 3-24 Save password successfully Screen