PLANET ICA-3150 User Manual
Page 17
Advertising
ICA-3150
If user wants to set device as
DHCP client, please refer to the following steps to set.
Step 1. Select an IP cam from the device list
Step 2. Check the “Enable DHCP” box
Step 3. Click “Generation”
Step 4. Click “Modify”
When you see the message, please click “Yes” to change the IP address.
Please make sure the IP address of PC is in the same subnet as device’s IP
address.
- 17 -
720P IR Bullet PoE IP Camera
Advertising
This manual is related to the following products: