PLANET ICA-3150 - Manual (Page 38)

ICA-3150
Appendix A: Ping IP Address
The ping (or Packet Internet Groper) command is used to detect whether a specific IP address
is accessible by sending a packet to the specific address and waiting for a reply. It’s also a
very useful tool to confirm whether Internet camera is installed or not, or if the IP address
conflicts with any other device over the network.
If you want to make sure the IP address of Internet camera, utilize the ping command as
follows:
z Start a DOS window.
z Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet camera.
The replies, as illustrated below, will provide an explanation to the problem.
If you want to detect any other device conflicting with the IP address of Internet camera, you
also can utilize the ping command but you must disconnect the Internet camera from the
network first.
- 38 -
720P IR Bullet PoE IP Camera