PLANET ICA-3260 - Manual (Page 14)

60fps Full HD IR Bullet IP Camera
ICA-3260
mode or orange in the wireless mode.
2.3 Initial Utility Installation
This chapter shows how to quickly set up your IP camera. The camera is with the default
settings. However to help you find the networked camera quickly, the windows utility PLANET
IP Wizard II can search the cameras in the network that can help you to configure some basic
setting before you start advanced management and monitoring.
1. Insert the bundled CD into the CD-ROM drive to launch the auto-run program. Once
completed, a welcome menu screen will appear.
2. Click the “IP Wizard II” hyperlink and a dialog box will appear as shown below.
If the welcome screen does not appear, click “Start” at the taskbar. Then,
select “Run” and type “D:\Utility\IPWizard II\setup.exe”, assuming D is your
CD-ROM drive.
3. The “Welcome to the Install Shield Wizard for PLANET IP Wizard II” prompt will be
displayed on the screen and click “Next” to continue.
4. Please click “Next” to install with original settings, or you may click “Change…” button to
modify the install folder and then press “Next” to continue.
10