PLANET ICA-3260 - Manual (Page 39)

60fps Full HD IR Bullet IP Camera
ICA-3260
• Access the device by entering Setting Î Network Î PPPoE as shown below:
PPPoE To enable or disable the PPPoE service here.
User Name Type the user name for the PPPoE service which is provided by ISP.
Password Type the password for the PPPoE service which is provided by ISP.
IP Address / Subnet
Mask / Gateway
Shows the IP information got from PPPoE server site.
Status Shows the Status of PPPoE connection.
3.5.6 Streaming
RTSP is a streaming control protocol, and a starting point for negotiating transports such as
RTP, multicast and Unicast, and for negotiating codes. RTSP can be considered a "remote
control" for controlling the media stream delivered by a media server. RTSP servers typically
use RTP as the protocol for the actual transport of audio/video data.
RTSP Port
Choose the RTSP port. The RTSP protocol allows a connecting client to
start a video stream. Enter the RTSP port number to use. The default value
is 554.
RTP Port
Specify the range of transmission port number of video stream. The default
range is 50000 to 50999. User can specify a number between 1024 and
65535.
1. To use the 3GPP function, in addition to the previous section, you might need
more information or configuration to make this function work.
2. The camera must be set as multi-profile mode, not mega-pixel mode.
35