5 using upnp of windows xp or 7, 1 windows xp – PLANET ICA-4210P User Manual

Page 22

Advertising
background image

60fps Full HD IR IP Camera with Remote Focus and Zoom

ICA-4210P

After keying in the new username and password, click the “

Submit

” button to perform your

setting accordingly. Click the “

<<

” button to go back to the previous page.

2.5 Using UPnP of Windows XP or 7

2.5.1 Windows XP

UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides
compatibility among networking equipment, software, and peripherals. This device is an UPnP
enabled device. If the operating system, Windows XP, of your PC is UPnP enabled, the device
will be very easy to configure. Use the following steps to enable UPnP settings only if your
operating system of PC is running Windows XP.

Please note that MS Windows 2000 does not support UPnP feature.

Go to

Start > Settings, and Click Control Panel.

The “

Control Panel” will display on the screen and double-click “Add or Remove Programs

to continue.

Advertising
This manual is related to the following products: