PLANET ICA-4210P - Manual (Page 46)

60fps Full HD IR IP Camera with Remote Focus and Zoom
ICA-4210P
White
Balance
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Color Level Large value will be colorful.
Hue Change the value by color tuning.
Brightness Large value will brighten camera.
Sharpness Large value will sharpen camera.
Contrast Large value will contrast camera heavily.
ICR
Use built-in photo sensor or manual to control ICR.
In case user selects manual mode, there are 4 modes: Night (On), Day (Off),
Auto or Schedule to control built-in IR LEDs. This function is very useful under
low illumination environment, even at 0 lux.
In case the Auto mode is selected, user needs to specify 3 parameters in
advance:
Night Mode Threshold (0~10000): this value sets the threshold to turn on IR
LED. It should be lower or equal to Day Mode Threshold.
Day Mode Threshold (0~10000): this value set the threshold to turn off IR
LED. It should be higher or equal to Night Mode Threshold.
Delay Time: The delay time between LED ON/OFF switching.
The Current Value is the current luminance from the captured
video. It’s a useful reference to set LED ON/OFF Threshold.
DIS
(Digital
This function is used to reduce blurring associated with the motion of a
camera during exposure. Specifically, it compensates for pan and tilt of a
camera. With video cameras, camera shake causes visible frame-to-frame