PLANET ICA-4210P - Manual (Page 50)

60fps Full HD IR IP Camera with Remote Focus and Zoom
ICA-4210P
Camera
Protocol
This device can connect to a PTZ camera or speed dome camera and controls
them through RS-485 interface.
Camera
Address
This is the camera ID set in PTZ camera or speed dome camera.
Please DO NOT change the default value if unnecessary. If so, user
needs to check and set value properly for both sides.
Baud
Rate
This is the communication speed between network module and P/T scanner.
If these parameters need to be changed, user needs to check and set value
properly for both network module and P/T scanner.
3.6.6 Preset Setting
This page provides the edit tool to modify or delete the “Preset Setting” item by item.
3.6.7 Tour Setting
Up to 128 positions can be preset, and the camera can be programmed to move to the preset
position sequentially.