PLANET ICA-4210P - Manual (Page 47)

60fps Full HD IR IP Camera with Remote Focus and Zoom
ICA-4210P
Image
Stabilization
)
jitter in the recorded video.
Real-time digital image stabilization is used to shift the electronic image from
frame to frame of video, enough to counteract the motion. This technique
reduces distracting vibrations from videos or improves still image quality by
allowing one to increase the exposure time without blurring the image. This
technique does not affect the noise level of the image.
2D/3D
De-Noise
2D/3D De-Noise can remove or lower unwanted noise and preserve fine
details and edges.
Default
Settings
Restore to factory image settings.
3.6.2 Exposure Control
Power Frequency Frequency of power line: 50 or 60Hz.
Exposure Control
Auto-Indoor: It will adjust the image sensor exposure automatically
under indoor environment.
Manual Exposure: User can configure sensor exposure to fixed
setting.
Auto: It will adjust the image sensor exposure automatically as
possible.
Maximum
Exposure Time
Set the Maximum Exposure Time. However, the real exposure time
may be shorter if there is a good light condition.
Exposure Value
Exposure value is AE target value. This value is to adjust the
integration, analog gain and digital gain to achieve the target
brightness value (Exposure Value).