PLANET IVS-2120 - Manual (Page 40)

Industrial Internet Video Server
User’s Manual of IVS-2120
Chapter 6. Configuration & Operation
6.1. Network Configuration
6.1.1 Network
This section provides the menu of connecting the device through Ethernet cable.
MAC Address Display the Ethernet MAC address of the device. Note that user
cannot change it.
Obtain an IP address
automatically
(DHCP)
Enable this checked box when a DHCP server is installed on the
network to issue IP address assignment. With this setting, the IP
address is assigned automatically. If this device cannot get an IP
address within limited tries, the device will assign a default IP
address like 192.168.0.20.
If you do not select “Obtain an IP address automatically”, then you
need to enter these network parameters by yourself.
IP Address This address is a unique number that identifies a computer or device
on the WAN or LAN. These numbers are usually shown in groups
separated by periods, for example: 192.168.0.200
Subnet Mask Subnets allow network traffic between hosts to be separated based
on the network's configuration. In IP networking, traffic takes the form
of packets. IP subnets advance network security and performance to
some level by organizing hosts into logical groups. Subnet masks
contain four bytes and usually appear in the same "dotted decimal"
data. For example, a very common subnet mask in its binary