PLANET IVS-2120 - Manual (Page 43)

Industrial Internet Video Server
User’s Manual of IVS-2120
ISP. A dynamic IP address complicates remote access since you may not know what your
current WAN IP address is when you want to access your network over the Internet. The
solution to the dynamic IP address problem comes in the form of a dynamic DNS service.
The Internet uses DNS servers to look up domain names and translates them into IP
addresses. Domain names are just easy to remember aliases for IP addresses. A dynamic
DNS service is unique because it provides a means of updating your IP address so that your
listing will remain current when your IP address changes. There are several excellent DDNS
services available on the Internet and best of all they’re free to use. One such service you can
use is www.DynDNS.org. You’ll need to register with the service and set up the domain name
of your choice to begin using it. Please refer to the home page of the service for detailed
instructions or refer to Appendix E for more information.
DDNS: To enable or disable the DDNS service here.
Server Name: Choose the built-in DDNS server.
DDNS Host: The domain name is applied of this device.
User Name: The user name is used to log into DDNS.
Password: The password is used to log into DDNS.
6.1.5. PPPoE
PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows Internet camera
connects to Internet with xDSL or cable connection; it can dial up your ISP and get a dynamic
IP address. For more PPPoE and Internet configuration, please consult your ISP.
It can directly connect to the xDSL, however, it should be setup on a LAN environment to
program the PPPoE information first, and then connect to the xDSL modem. Power on again,
then the device will dial on to the ISP connect to the WAN through the xDSL modem.
The procedures are
• Connect to a LAN by DHCP or Fixed IP
• Access the device, enter Setting Î Network Î PPPoE as below