Figure 5 enable the secondary rj45 power, Figure 6 power on the device by pwr button – PLANET WNAP-7300 User Manual
Page 17
Advertising
※ The secondary Ethernet port (labeled LAN 2) is for IP video integration. To use it you need
to enable the secondary port in advance before connecting with the IP camera from the
WNAP-7300’s Web Management as shown below.
Figure 5 Enable the Secondary RJ45 Power
3.
Press the black PWR button beside the LAN 1 Ethernet port.
Figure 6 Power on the device by PWR button
- 7 -
Advertising