PLANET WNAP-7300 User Manual
Page 39
Data Rate
Usually “Auto” is preferred. Under this rate, the Wireless Outdoor WNAP-7300 will automatically
select the highest available rate to transmit. In some cases, however, like where there is no great
demand for speed, you can have a relatively-low transmit rate for compromise of a long distance.
Channel Mode
Four levels are available: 20MHz and 40MHz. The last one can enhance data throughput, but it
takes more bandwidth, thus it might cause potential interference.
Extension Channel Protection Mode
This is to avoid conflict with other wireless network and boost the ability of your device to catch all
legacy devices transmissions. However, it may decrease wireless network performance.
Compared to CTS-Self; the transmission amount of CTS-RTS is much lower.
Enable MAC Clone
Available only under wireless client mode, it hides the MAC address of the WNAP-7300 while
displays the one of associated wireless client or the MAC address designated manually.