2 using the external antenna, Figure 10 remove the plugs, Figure 11 connect to external antenna – PLANET WNAP-7300 User Manual
Page 20
Advertising
2.2.2 Using the External Antenna
The WNAP-7300 provides two reverse SMA antenna connectors if you prefer to use the external
antenna for your application instead of the built-in directional antenna, please follow the steps below.
1.
Remove the two plugs as circled below:
Figure 10 Remove the plugs
2.
Connect your external antenna to the SMA-type connectors at the bottom of the WNAP-7300.
Figure 11 Connect to external antenna
- 10 -
Advertising