8 basic wireless settings, Figure 27 basic wireless settings – PLANET WNAP-7300 User Manual
Page 37
3.8 Basic Wireless Settings
Open “Basic Settings” in “Wireless” as below to make basic wireless configuration.
Figure 27 Basic Wireless Settings
Disable Wireless LAN Interface
Check this option to disable WLAN interface, then the wireless module of the WNAP-7300 will
stop working and no wireless device can connect to it.
Wireless Mode
Four operating modes are available on the WNAP-7300.
AP: The WNAP-7300 establishes a wireless coverage and receives connectivity from other
wireless devices.
Wireless Client: The WNAP-7300 is able to connect to the AP and thus join the wireless network
around it.
Bridge: The WNAP-7300 establishes wireless connectivity with other APs by keying in remote
MAC address. Please refer to the “WDS Setting” for detailed configuration.
AP+Bridge: The WNAP-7300 servers as AP and Bridge concurrently. In other words, it can
provide connectivity services for WNAP-7300s under WDS mode.
Wireless Network Name (SSID)