PLANET BT-200U - Manual (Page 24)

Broadband Router User Guide
20
Devices:
Name name of the device, e.g., My Bluetooth Device
Type type of the device, e.g., USB.
Device Properties:
Manufacturer the name of the company that manufactured the device selected in
the Devices section of this dialog box.
Firmware
Revision the manufacturer's firmware version number.
Device Status indicates that the device is operating properly or that there is a
problem/conflict.
Device Ad-
dress the Bluetooth Device Address (BDA or BD_Addr) programmed into
this device when it was manufactured.
HCI Version the version number of the Bluetooth Specification that the Host
Controller Interface complies with.
HCI Revision the revision number of the Bluetooth Specification that the Host
Controller Interface complies with.
LMP Version the version number of the Bluetooth Specification that the Link
Manager Protocol complies with.
LMP Sub
Version the sub-version number of the Bluetooth Specification that the Link
Manager Protocol complies with.
Advanced displays the Advanced Settings dialog box, which allows you to select
the country code and transmission power settings. This option is not available on all
systems
.
Hardware Advanced Settings Dialog Box
When available, this dialog box is reached from the Hardware tab of the Bluetooth
Configuration Panel.
Depending on the country in which the hardware is sold and/or in which it will be used,
the Advanced button may not be present.
From this dialog box you can set the:
North America, Europe (except France),
and Japan Country Code:
France and China
High
Medium
Maximum Transmission Power:
Low
Ÿ Click the Apply button to implement the changes. A dialog box appears with
notification that the Bluetooth device attached to this computer must be reset be-
fore the change(s) will take effect.
Ÿ Click the Yes button to reset the Bluetooth device now —all open Bluetooth
connections will be closed.