PLANET BT-200U - Manual (Page 26)

Broadband Router User Guide
22
Sounds can be associated on an individual basis with several events, including:
1. When a PIN code is required
2. When a remote device attempts to access:
¨ Files on this computer
¨ A Bluetooth port
¨ The Dial-up network service
¨ The LAN Access service
¨ The Fax service.
3. When a remote device attempts to send:
¨ Synchronization information.
¨ Information items
To associate a sound with a Bluetooth event:
1. From the Bluetooth Configuration Panel, select Notifications tab.
2. In the Notify column of the Events list, select the check box associated with the
event.
3. In the Sound area of the Notifications tab, click the Browse button and navigate to
the sound file (*.wav) to be used for notification. To preview the sound file, click the
play (
>
) button.
4. Click the OK button to close the Bluetooth Configuration Panel.
Note: The sound will not play, even though it has been assigned, unless the Notify
check box is selected.