PLANET WNRT-320GS - Manual (Page 16)

User’s Manual of WNRT-320GS
-10-
Chapter 3. Installation Guide
3.1. System Requirements
Broadband Internet Access Service (Cable / xDSL / Ethernet connection)
One Cable/xDSL Modem that has an RJ-45 connector (not necessary if the WNRT-320GS is
connected directly to the Ethernet.)
PCs with a working Ethernet Adapter and an Ethernet cable with RJ-45 connectors
PC of subscribers running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or
later, Linux, UNIX or other platform compatible with TCP/IP protocols
Above PC installed with WEB Browser
It is recommended to use Internet Explore 7.0 or above to access the WNRT-320GS.
3.2. Typical Application
Please shift the hardware switch on the WNRT-320GS to change the operation mode.
3.2.1. Router Mode
In Router Mode, the NAT (Network Address Translation) function and DHCP server are both enabled in default,
and all wireless clients will obtain a private IP address automatically by the DHCP server of WNRT-320GS and
share the same public IP assigned by 3G mobile base station or local ISP through WAN port of the WNRT-320GS.
The WAN port of WNRT-320GS is supposed to connect with the Cable / xDSL Modem by the Ethernet cable.
Figure 3-1