Firewall, Port filtering – PLANET WNRT-320GS User Manual
Page 51
User’s Manual of WNRT-320GS
-45-
DHCP Client
If your ISP provides the DHCP service, please select DHCP Client type, and the WNRT-320GS
will automatically obtain IP parameters from your ISP. Please refer to the instructions below
Figure 4-26 WAN Access Type – DHCP Client
Object
Description
Host Name
This option specifies the Host Name of the Router.
MTU Size
The default MTU (Maximum Transmission Unit) value is 1492 Bytes. It
is not recommended that you change the default MTU Size unless
required by your ISP.
Table 4-14
4.6. Firewall
The Firewall menu contains submenus of the settings about firewall and access filtering. Please refer
to the following sections for the details.
Figure 4-27
4.6.1. Port Filtering
Choose menu “Firewall Æ Port Filtering”, and you can configure which port range and protocol to be
restricted. After the configuration, please click the “Apply Changes” button to save the settings.