Route setup, Management – PLANET WNRT-320GS User Manual
Page 59
Advertising
User’s Manual of WNRT-320GS
-53-
QoS Rule Setting
To set the priority rule, you can appoint the computer by IP address
or MAC address, and enter it in the correct field. Select minimum or
maximum bandwidth, and then fill the uplink and downlink data
rate into the field.
Table 4-20
4.8. Route Setup
The page is used to setup dynamic routing protocol or edit static route entry. After the configuration,
please click the “Apply Changes” button to save the settings.
Figure 4-35 Routing Setup
4.9. Management
The Management menu contains submenus of the general settings of the WNRT-320GS. Please refer
to the following sections for the details.
Advertising