PLANET WNRT-627 - Manual (Page 49)

User’s Manual of WNRT-627
-49-
If you want to do some advanced configurations, please click the Advanced button, and the page
shown in Figure 5-12 will then appear:
Figure 5-12 PPPoE Advanced Settings
The page includes the following fields:
Object Description
MTU Size The default MTU size is “1480” bytes, which is usually fine. It is not
recommended that you change the default MTU Size unless required
by your ISP.
Service Name/AC Name The service name and AC (Access Concentrator) name, which should
not be configured unless you are sure it is necessary for your ISP. In
most cases, leaving these fields blank will work.
ISP Specified IP
Address If your ISP does not automatically assign IP addresses to the Router
during login, please click “Use IP address specified by ISP” check
box and enter the IP address provided by your ISP in dotted-decimal
notation.
Detect Online Interval The Router will detect Access Concentrator online at every interval.
The default value is “0”. You can input the value between “0” and “120”.
The value “0” means no detect.
DNS IP address If your ISP does not automatically assign DNS addresses to the Router
during login, please click “Use the following DNS servers” check box
and enter the IP address in dotted-decimal notation of your ISP’s
primary DNS server. If a secondary DNS server address is available,
enter it as well.
Table 5-5