PLANET WNRT-627 - Manual (Page 71)

User’s Manual of WNRT-627
-71-
setting and is recommended.
This value determines the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM field is a countdown field informing clients of
the next window for listening to broadcast and multicast messages.
When the Router has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM Interval value.
You can specify the value between 1-255 Beacon Intervals. The
default value is 1, which indicates the DTIM Interval is the same as
Beacon Interval.
DTIM Interval
WMM function can guarantee the packets with high- priority messages
being transmitted preferentially. It is strongly recommended enabled.
Enable WMM
This function is recommended for it will increase the data capacity by
reducing the guard interval time.
Enable Short GI
This function can isolate wireless stations on your network from each
other. Wireless devices will be able to communicate with the Router
but not with each other. To use this function, check this box. AP
Isolation is disabled by default.
Enabled AP Isolation
Table 5-19
If you are not familiar with the setting items on this page, it's strongly recommended to
keep the provided default values; otherwise it may result in low wireless network
performance.