PLANET WNRT-627 - Manual (Page 70)

User’s Manual of WNRT-627
-70-
5.6.4 Wireless Advanced
Choose menu “Wireless→Wireless Advanced”, and you can configure the advanced settings of your
wireless network.
Figure 5-28 Wireless Advanced
The page includes the following fields:
Object Description
Here you can specify the transmit power of Router. You can select
High, Middle or Low which you would like. High is the default setting
and is recommended.
Transmit Power
Enter a value between 20-1000 milliseconds for Beacon Interval
here. The beacons are the packets sent by the router to
synchronize a wireless network. Beacon Interval value determines
the time interval of the beacons. The default value is 100.
Beacon Interval
Here you can specify the RTS (Request to Send) Threshold. If the
packet is larger than the specified RTS Threshold size, the router will
send RTS frames to a particular receiving station and negotiate the
sending of a data frame. The default value is 2346.
RTS Threshold
Fragmentation
Threshold
This value is the maximum size determining whether packets will be
fragmented. Setting the Fragmentation Threshold too low may result in
poor network performance since excessive packets. 2346 is the default