PLANET ICA-HM127 - Manual (Page 44)

4.4 IP Filter
When this IP camera is directly connected to Internet and not protected by firewall, this
function acts like a mini built-in firewall to protect the safety of this IP camera and avoid attacks
from hackers.
Here are the descriptions of every setup item:
Item Description
Enable Filter Check this box to enable IP address filter, uncheck this Box to
disable this function.
Accepted IP list Here lists all IP address that can build connections to this IP
camera. If you want to remove a set of IP address from the list,
click on the IP address and click ‘Remove’ button.
IP Address
(Accepted IP list)
Input the starting and ending IP address of IP address you wish to
accept connections here. IP camera will only accept connections
established from these IP address.
If you want to specify one IP address only, input the same IP
43