ProSoft Technology MVI69L-MBTCP - Manual (Page 137)

MVI69L-MBTCP ♦ CompactLogix Platform Reference
Communication Module User Manual
ProSoft Technology, Inc. Page 137 of 152
January 6, 2014
7.4.10 Set Driver and Command Active Bits Block
Block 9500: Set Driver and command active bits
This block enables and disables the Modbus TCP/IP Clients and Servers of the
module.
Block 9500: Request from Processor to Module
Offset Description
0 Block ID 9500 to set server and client enable/disable state
1 Server active state
0=Disabled, 1=Enabled
2 Client 0 to15 bit map for active status of clients
3 Spare
4 to 13 Client 0 to Client 9 command active bits. One word for each client with each bit
used to turn on and off the commands for the client.
0=Disabled, 1=Enabled
24 to 239 Spare
Block 9500: Response from Module to Processor
Offset Description
0 Block ID 9500 requested by processor
1 The next write block ID
2 to 239 Spare