ProSoft Technology MVI69L-MBTCP User Manual
Page 96
Diagnostics and Troubleshooting
MVI69L-MBTCP ♦ CompactLogix Platform
User Manual
Communication Module
Page 96 of 152
ProSoft Technology, Inc.
January 6, 2014
4 In the Connection Setup dialog box, click the
B
ROWSE
D
EVICE
(
S
)
button to
open the ProSoft Discovery Service. Select the module, then right-click and
choose A
SSIGN
T
EMPORARY
IP.
5
The module’s default IP address is usually 192.168.0.250. Choose an unused
IP within your subnet, and then click OK.
Important: The temporary IP address is only valid until the next time the module is initialized. For
information on how to set the module’s permanent IP address, see page 58.
6 Close the ProSoft Discovery Service window. Enter the temporary IP address
in the Ethernet address field of the Connection Setup dialog box, then click
the T
EST
C
ONNECTION
button to verify that the module is accessible with the
current settings.
7 If the Test Connection is successful, click C
ONNECT
. The Diagnostics menu
will display in the Diagnostics window. At this point, the module has been
established on the Ethernet network with a unique IP address.