ProSoft Technology MVI69L-MBTCP - Manual (Page 54)

MVI69L-MBTCP Configuration MVI69L-MBTCP ♦ CompactLogix Platform
User Manual Communication Module
Page 54 of 152 ProSoft Technology, Inc.
January 6, 2014
default value of 5 will be utilized.
Command Error
Delay 0 to 300 Specifies the number of 100 millisecond intervals to turn off
a command in the error list after an error is recognized for
the command. If this parameter is set to 0, there will be no
delay.
MBAP Port Override Yes or No Override default port settings.
‘No’ = Standard Server Port 502 with MBAP format
messages will be used. All other Server Port values use
encapsulated Modbus message format (RTU via TCP).
‘Yes’ = MBAP format messages are used for all Server Port
values. RTU via TCP will not be used.