ProSoft Technology AN-X-AMX - Manual (Page 10)

Page 6 AN-X-AMXRIO November 2011
The cable must be RG-59/U.
Ethernet Cabling
AN-X has a standard RJ-45 connector for connecting to Ethernet.
If you are connecting AN-X to an existing network through a router or switch, use a
standard Ethernet cable.
If you are connecting directly between a computer and AN-X, use a crossover cable.
Software Installation
You must uninstall any previous version of the software before you can install a new
version. Use the Windows Control Panel Add and Remove Programs to remove the old
version.
Insert the CD supplied with the AN-X module and run the setup program on the CD.