Hardware features, Package contents, Other requirements – ProSoft Technology AN-X-AMX User Manual
Page 7: Modes of operation
AN-X-AMXRIO Page
3
Hardware Features
The module has:
• LEDs to indicate the status of the connection to the Ethernet, its
own internal state, and the state of the connection to the remote I/O
network
• an Ethernet connector
• a 9-pin D-shell connector to connect to the AutoMax remote I/O
network
• a power connector
Package Contents
• AN-X-AMXRIO module
• CD containing software and documentation
Other Requirements
To exchange scheduled data with a ControlLogix processor over Ethernet requires:
• Version 12 or above of RSLogix 5000
• version 12 or above of the ControlLogix firmware
• 100 Mbit/second Ethernet network and hardware. The network should use
switches, not hubs
Modes of Operation
There are three AN-X modes of operation:
• Boot mode. The AN-X is running its low level startup firmware.