Selecting an an-x – ProSoft Technology AN-X-AMX User Manual
Page 34
Advertising
![background image](/files/866205/content/doc034.png)
Page
30
AN-X-AMXRIO
November 2011
Selecting an AN-X
Before you can perform an operation on an AN-X, you must select it. Choose
Utilities/Select An AN-X
to select a specific AN-X.
From the Adapter list, select the network adapter that connects to the Ethernet network
that contains the AN-X.
In the Ethernet MAC Address field, enter the MAC Address of the AN-X you wish to
select. It can be found on the AN-X label or using the Locate All AN-X Modules
command. The format is as shown above, six pairs of hexadecimal digits separated by
hyphens.
Advertising