ProSoft Technology AN-X-AMX - Manual (Page 32)

Page 28 AN-X-AMXRIO November 2011
Using AnxInit
AnxInit is a 32-bit Windows application supplied with AN-X to perform the following
functions:
• Locate and identify AN-X modules on the Ethernet network
• Select a specific AN-X for configuration
• Set the IP address and other network parameters for an AN-X
• Restart an AN-X
• Display information about the selected AN-X
• Read the kernel parameters for the selected AN-X
• Update the flash (low level firmware) on the selected AN-X
• Update the firmware on the selected AN-X
• Patch the firmware on the selected AN-X
In addition, it can be used to:
• clear the AnxInit log
• copy the contents of the log to the clipboard for use by another application.
This is often useful for technical support
AnxInit Log
AnxInit logs messages in its main window. These messages are often useful for
determining the cause of errors or for technical support.
To clear the log, select Edit/ClearLog.
To copy the contents of the Log to the Windows clipboard so that they can be pasted into
another application, select Edit/Copy.