ProSoft Technology AN-X-AMX - Manual (Page 42)

Page 38 AN-X-AMXRIO November 2011
• AN-X to AN-X configuration
Update Firmware Command
The Utilities/Update Firmware command updates all the firmware on an AN-X you have
previously selected using the Utilities/Select An AN-X command.
This command resets the AN-X. You will receive a warning and be given the
opportunity to Cancel the command.
If you cancel at the filename dialog, the AN-X has already been reset and is in
configuration mode. Use the Utilities/Restart AN-X command to restart it in production
mode.
Click the Next>> button, and select the firmware file you want to download and click
Open
.
AnxInit transfers the firmware file and restarts the AN-X.
After you update the firmware, you must reconfigure the AN-X and restore the AutoMax
remote I/O configuration
Patch Firmware
The Utilities/Patch Firmware command applies small patches to the firmware running on
the AN-X.
These patch files files have extension pch.
This command resets the AN-X. You will receive a warning and be given the
opportunity to Cancel the command.