Solutions to projector power or shut-off problems – Epson Home Cinema 2200 2700-Lumen Full HD 3LCD Smart Projector (2021 Version) User Manual

Page 109

Advertising
background image

109

• Make sure the Bluetooth audio device is paired to the projector and not to another device.

• Make sure the Bluetooth audio device that is paired to the projector supports copyright protection

(SCMS-T) and A2DP.

• Make sure the volume level on the paired Bluetooth audio device and projector is turned up.

• Make sure there are no obstacles between the Bluetooth audio device and the projector and that the

Bluetooth audio device is within the specified communication distance. Avoid using the projector near
wireless networks, microwave ovens, 2.4 GHz cordless phones, or other devices that use the 2.4 GHz
frequency band.

Parent topic:

Solving Image or Sound Problems

Related references

Projector Feature Settings - Settings Menu

Solving Projector or Remote Control Operation Problems

Check the solutions in these sections if you have problems operating the projector or remote control.

Solutions to Projector Power or Shut-Off Problems
Solutions to Remote Control Problems

Parent topic:

Solving Problems

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:

• Make sure the power cord is securely connected to the projector and to a working electrical outlet.

• If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of

inactivity. Press the power button to wake the projector and adjust the

Sleep Mode Timer

setting to

change the sleep interval.

• If the projector's lamp shuts off, the status light is flashing blue, and the Temp light is orange, the

projector has overheated and shut off. Check the solutions for this light status.

• If the power button on the remote control does not turn on the projector, check its batteries.

• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord

and contact Epson.

• Make sure the lamp and lamp cover are installed correctly.

Parent topic:

Solving Projector or Remote Control Operation Problems

Advertising