Epson Home Cinema 2200 2700-Lumen Full HD 3LCD Smart Projector (2021 Version) - Manual (Page 88)

88
Note: We recommend the use of genuine Epson replacement lamps. The use of non-genuine lamps
may affect projection quality and safety. Any damage or malfunction caused by the use of non-genuine
lamps may not be covered by Epson's warranty.
Replacing the Lamp
Resetting the Lamp Timer
Parent topic: Projector Maintenance
Related references
Optional Equipment and Replacement Parts
Projector Information Display - Info Menu
Projector Lamp Specifications
Replacing the Lamp
Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.
Warning: Let the lamp fully cool before replacing it to avoid injury.
You can replace the lamp while the projector is mounted to the ceiling, if necessary.
1. Turn off the projector and unplug the power cord.
2. Allow the projector lamp to cool down for at least one hour.
3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp
cover.