Shutting off the picture and sound temporarily – Epson Home Cinema 2200 2700-Lumen Full HD 3LCD Smart Projector (2021 Version) User Manual
Page 58
58
You see a screen like this:
Note:
The active linked device source is indicated in blue.
7.
Select the device you want to control and project images from and press
Enter
.
8.
Select the following HDMI link options as necessary:
•
Audio Out Device
: selects which device outputs audio. Select
Projector
to output audio from the
projector’s built-in speakers or from an external speaker connected to the Audio Out port. Select
AV System
to output audio from an AV amplifier that supports the HDMI CEC standards.
•
Power On Link
: select what happens when you turn on the projector or linked device. Select
PJ -
> Device or Bidirectional
to turn the linked device on when the projector is turned on, or
Device -
> PJ or Bidirectional
to turn the projector on when the linked device is turned on.
•
Power Off Link
: select whether linked devices are turned off when the projector is turned off.
9.
When you are finished, press
Esc
.
Parent topic:
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projector's picture and sound. Any sound or video action continues to
run, however, so you cannot resume projection at the point that you stopped it.