HP LaserJet Pro 3001dw Monochrome Wireless Printer - Manual (Page 14)

Table 1-5 Wi-Fi light (continued)
Status Description
Wi-Fi light is blinking quickly, and Attention light is blinking. An error occurs or an overlap session is detected when using WPS.
Wi-Fi light is blinking quickly for 3 seconds. Wireless WPS connection failed.
Use the HP Smart app to print, scan, and manage
The HP Smart app can help you perform many different printer tasks, including the following:
NOTE: Set up / connect the printer to the Internet using the control panel or through the HP software. You can
download the HP software from hpsmart.com/setup on a Windows or Mac computer.
● Print and scan documents and photos.
● Share documents through email and other applications.
● Manage printer settings, check printer status, print reports, and order supplies.
NOTE:
● HP Smart is supported on mobile devices and computers running on iOS, Android, Windows 10 and above,
and macOS (versions 10.14, 10.15, 11.0, and 12).
● The HP Smart app might not be available in all languages. Some features might not be available with all
printer models.
To install HP Smart and open the app
Complete the following steps to install and open HP Smart, connect your printer, and begin using the app.
1. Download and install HP Smart app on your device.
NOTE:
● iOS, Android, Windows 10 and above, and macOS: You can download HP Smart from the respective app
stores for the device.
2. Open HP Smart after installation.
● iOS/Android: From the mobile device desktop or app menu, tap HP Smart.
● Windows 10 and above: From the computer desktop, click Start, and then select HP Smart from the app
list.
● macOS: From the Launchpad, select HP Smart.
6 Chapter 1 Get started