HP LaserJet Pro 3001dw Monochrome Wireless Printer - Manual (Page 22)

1. Open the input tray.
2. Slide the paper guides to the edges of the input tray.
3. Insert the envelopes in portrait orientation and with the side to be printed facing up.
Make sure the stack of envelopes is aligned with the appropriate paper size lines in the tray. Also, make sure
the stack of envelopes does not exceed the stack height marking in the tray.
4. Adjust the paper guides until they touch the edges of the stack of envelopes.
5. Close the input tray.
6. Open the output tray extender.
Load labels
This topic describes how to load labels into the input tray.
1. Open the input tray.
2. Remove all paper from the input tray.
3. Slide the paper guides to the edges of the input tray.
4. Insert the sheet of labels in portrait orientation and with the side to be printed facing up.
14 Chapter 3 Load media