LEICA V-Lux 5 Digital Camera - Manual (Page 123)

123
4K Photo and Drive Settings
Recording with the 4K Photo function and selecting pictures to save
Auto Marking function
The camera automatically sets markers on scenes in which a face or the movement of a subject is
detected.
(Example: At the scene when a vehicle passes by, a balloon bursts, or a person turns around)
• Up to 10 markers are displayed for each file.
•In the following cases, markers may not be set by the Auto Marking function depending on the
recording conditions and the status of subjects.
– The camera is moving because of panning or jitter
– The movement of a subject is slow/small, or the subject is small
– A face is not facing front
■
Select markers to be displayed
Touch [ ] on the slide view screen, 4K burst playback screen, or marker operation
screen.
[Auto] Displays a marker on a scene in which a face or the movement of a subject is
detected.
[Face Priority] Displays a marker with preference given to a scene in which a face is detected.
[Motion Priority] Displays a marker with preference given to a scene in which the movement of a
subject is detected.
[Off] Displays manually set markers only.
●
You cannot delete markers set by the Auto Marking function.
●
The markers set by the Auto Marking function may not be displayed correctly if you split the 4K
burst file on a device other than this camera and then play it back on the camera.
●
In the following cases, markers set by the Auto Marking function are not displayed.
•4K burst files recorded with [4K Pre-Burst]