LEICA V-Lux 5 Digital Camera - Manual (Page 244)

244
Connecting with other devices
Printing
You can connect a camera directly to a PictBridge-compatible printer for printing.
Preparation
•Adjust the print quality or other settings on your printer, as needed.
•Turn on the camera and printer.
1
Connect camera to printer
•Check the plug direction and insert it straight in. (If the cable is inserted in the
wrong direction, the plug could become deformed and cause faulty operation.)
Also, do not insert into the wrong jack. Doing so may cause damage to this unit.
•Do not use any other USB cables except a genuine Leica USB cable of the
supplied type. Using cables other than the above may cause a malfunction.
[ ]
•Do not disconnect the USB cable (supplied) when the cable disconnection icon [ ] is
displayed (may not be displayed with some printers).
[USB/CHARGE] jack
USB cable (supplied)
2
Use to select [PictBridge(PTP)] and press [MENU/SET]
3
Use to select a picture and press [MENU/SET]
4
Use to select [Print start] and press [MENU/SET]