Storing recorded stills and video in the recorder – LEICA V-Lux 5 Digital Camera User Manual

Page 243

Advertising
background image

243

Connecting with other devices

Storing recorded stills and video in the recorder

You can connect the camera to a Blu-ray recorder or DVD recorder that is compatible and

store pictures from the camera to the device.

Preparation

•Turn on the camera and recorder.

1

Connect camera to recorder

•Check the plug direction and insert it straight in. (If the cable is inserted in the

wrong direction, the plug could become deformed and cause faulty operation.)

Also, do not insert into the wrong jack. Doing so may cause damage to this unit.

•Do not use any other USB cables except a genuine Leica USB cable of the

supplied type. Using cables other than the above may cause a malfunction.

[USB/CHARGE] jack

USB cable (supplied)

2

Use to select [PC(Storage)] and press [MENU/SET]

•If you set the [USB Mode] to [PC(Storage)] in the [Setup] menu in advance, the

camera will be automatically connected to the recorder without displaying the

[USB Mode] selection screen.

3

Dub by operating the recorder

•For details on dubbing and playback procedures, refer to the operating

instructions for the recorder.

•Some recorders may not support certain modes, such as the 4K video mode.

Use a sufficiently charged battery. When the battery begins to run out during communication, a

warning beep sounds. In this case, stop the transfer immediately. Otherwise, the data may be

damaged.

Before inserting or removing a card, turn the camera off and disconnect the USB cable.

Advertising