LEICA V-Lux 5 Digital Camera - Manual (Page 209)

209
Using Menu Functions
Menu list
[Monitor Luminance]
Sets the monitor brightness according to the ambient light level.
(Auto)
During recording, the brightness is adjusted automatically according to how
bright it is around the camera.
During playback, the brightness is the same as when you last recorded.
(If you have not recorded once since turning on the camera, a standard
brightness is used.)
(Mode 1) The brightness is increased.
(Mode 2) The brightness is standard.
(Mode 3) The brightness is decreased.
●
Some subjects may look different from their actual appearance, but the recorded picture will not
be affected.
●
Setting [ ] or [ ] reduces the operating time.
[m/ft]
Allows selecting how distance is displayed, in ft. or m.
[Eye Sensor]
[Sensitivity] Use this setting to set the sensitivity of the eye sensor.
[EVF/Monitor Switch]
Use this setting to switch the display between the viewfinder and monitor.
[EVF/MON AUTO] (Automatic switching between viewfinder and monitor) /
[EVF] (Viewfinder display) / [MON] (Monitor display)
•After the display is switched using the [EVF] button, the setting of [EVF/
Monitor Switch] will also change.
[USB Mode]
Select communication method for when connecting camera to a computer or printer with
USB cable (supplied).
[Select on connection]
Select communication method each time you connect to a
computer or PictBridge-compatible printer.
[PC(Storage)] Select when connecting to a computer.
[PictBridge(PTP)] Select when connecting to a PictBridge-compatible printer.
→ [Setup]