LEICA V-Lux 5 Digital Camera - Manual (Page 62)

62
Recording mode
Taking pictures with automatic aperture value and
shutter speed settings
(Program AE Mode)
Recording mode:
Take pictures with automatic aperture value and shutter speed settings to match the
image subject brightness.
1
Set mode dial to [ ]
2
Press the shutter button halfway to display the aperture value
and shutter speed value on screen
•If the aperture value and shutter speed flash red, you do not have the correct
exposure.
3
Use Program Shift to change the values
by turning the front or rear dial while
the numeric values are on screen (they
remain visible for approx. 10 s)
Program Shift indication
Shutter speed
Aperture value
8.0 5.6 2.8 4.0
250 125 60 30 15
60 p
•Exit Program Shift by turning the camera off and on again or by turning the front
or rear dial until the Program Shift icon disappears.
•Program Shift can easily be canceled by setting a function button to [One Push
AE]. (→ 52, 68)
About Program Shift
The function for maintaining the same exposure (brightness) while changing the aperture
value and shutter speed combination is called “Program Shift”. You can use “Program
Shift” to take pictures by adjusting the aperture value and shutter speed in Program AE
Mode.
●
Program Shift cannot be used in the following cases:
•When recording using the flash
•When recording 4K photos
•When recording using [Post Focus]
•When ISO sensitivity is set to [ ]