LEICA V-Lux 5 Digital Camera - Manual (Page 39)

39
Basics
Basic operation
Front Dial/Rear Dial
Rotating:
Selection of items or setting of values is performed during the
various settings.
Front dial
Rear dial
Allows you to set the aperture, shutter speed and other settings when in [ ] / [ ] / [ ] /
[ ] mode.
Mode dial Front dial Rear dial
Program Shift Program Shift
Aperture value Aperture value
Shutter speed Shutter speed
Aperture value Shutter speed
Temporarily changing the operation of the front/rear dials ([Dial Operation
Switch])
Preparation
Assign [Dial Operation Switch] to the function button (→ 52)
•[Dial Operation Switch] is assigned to [FN5] when the camera leaves the factory.
1 Press the function button
•A guide will be displayed showing the items temporarily assigned
to the front/rear dials.
•If no operations are performed, the guide will disappear in a few
seconds.
2 Turn the front/rear dials while the guide is displayed
3 Press [MENU/SET] to confirm the setting
•You can also perform the same operation by pressing the shutter
button halfway.
●
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] ([Operation]) menu. (→40 )